Vancouver Island Canada - Monster Lingcod
- brandonkop
- Topix Acquainted
- Posts: 46
- Joined: Sun Oct 17, 2010 8:15 am
- Experience: N/A
Vancouver Island Canada - Monster Lingcod
Fishing for Monster Lingcod and hooked up with a dandy on a Delta Tackle Scampi Tail Glow Jig. We were baiting our hooks with some fish skin which is super tough, stays on like a charm and lasts for hours. Hauling up these huge, great tasting fish is one of the joys of fishing off of Vancouver Island here in British Columbia. It is amazing that you can drive to a fishing destination like this.
https://www.youtube.com/watch?v=cxekMxxj9cg
https://www.youtube.com/watch?v=cxekMxxj9cg
- rlown
- Topix Docent
- Posts: 8224
- Joined: Thu Oct 25, 2007 5:00 pm
- Experience: Level 4 Explorer
- Location: Wilton, CA
Re: Vancouver Island Canada - Monster Lingcod
Nice Ling! Where I used to go out of either Half Moon Bay or Santa Cruz, CA, the seas weren't that flat (swells), and there were blue sharks that would gladly take your fish (well half of it) by the time you got it up near the boat. It's really nice to see that someone can actually fish in sunlight
We on the cali coast were mostly in the fog.
Thanks for the report, Brandon. Now post a recipe?
Russ

Thanks for the report, Brandon. Now post a recipe?
Russ
- Jimr
- Forums Moderator
- Posts: 2182
- Joined: Fri Jul 31, 2009 2:14 pm
- Experience: Level 4 Explorer
- Location: Torrance
Re: Vancouver Island Canada - Monster Lingcod
Ha Ha, from farmer to fisherman. Down here in So. Cal. we're fishing 60 miles away and 1200 ft deep. We fish with an anchor and ganyon for reds and such, but the true Lingcod fishermen will drop a single heavy rubber jig tipped with squid. I don't mind anchor fishing, but I'd prefer what you were doing. It's fun to bring up a stringer of fish in one haul, but it basically a day of dropping and pulling anchor.
If you don't know where you're going, then any path will get you there.
- rlown
- Topix Docent
- Posts: 8224
- Joined: Thu Oct 25, 2007 5:00 pm
- Experience: Level 4 Explorer
- Location: Wilton, CA
Re: Vancouver Island Canada - Monster Lingcod
'Jimr wrote:Ha Ha, from farmer to fisherman. Down here in So. Cal. we're fishing 60 miles away and 1200 ft deep. We fish with an anchor and ganyon for reds and such, but the true Lingcod fishermen will drop a single heavy rubber jig tipped with squid. I don't mind anchor fishing, but I'd prefer what you were doing. It's fun to bring up a stringer of fish in one haul, but it basically a day of dropping and pulling anchor.
Assuming you mean dinglebar fishing? http://myemail.constantcontact.com/Ding ... bG46ayS7cQ
(scroll down to the dinglebar section..
Some recipes included there as well

Russ
- Jimr
- Forums Moderator
- Posts: 2182
- Joined: Fri Jul 31, 2009 2:14 pm
- Experience: Level 4 Explorer
- Location: Torrance
Re: Vancouver Island Canada - Monster Lingcod
No, I mean ganyon. 3 to 5lbs of lead at the end with a series of 5 to 10 hooks on dropper loops going right up the main line. For the life of me, I can't seem to find a simple drawing.
If you don't know where you're going, then any path will get you there.
- rlown
- Topix Docent
- Posts: 8224
- Joined: Thu Oct 25, 2007 5:00 pm
- Experience: Level 4 Explorer
- Location: Wilton, CA
Re: Vancouver Island Canada - Monster Lingcod
One of these?
- Jimr
- Forums Moderator
- Posts: 2182
- Joined: Fri Jul 31, 2009 2:14 pm
- Experience: Level 4 Explorer
- Location: Torrance
Re: Vancouver Island Canada - Monster Lingcod
I bypassed that shot because it was only two hooks with a skirt. Not worth dragging 5lbs of weight up and down 1200 ft for only two hooks. Here's the best I can do drawing with a mouse.
I've seen them 50 hooks in length. You wouldn't believe it, but the guy I saw using it had what looked like a PVC bong with a slit all the way down the side. He attached one swivel end to his line and slid each hook in succession up the slit to keep the line from tangling, then he attached a 5lb sinker at the other end. He put his rod in freespool with the clicker on, held the base of the bong pointing the other end toward the water and let the weight go. The hooks shot off like a machine gun. It worked well for squid and when anchovies were nose hooked.
I watched this guy fire this thing off, sit for 20 minutes, then reel up 40 or 50 whitefish with a few reds or other rockfish mixed in.
I've seen them 50 hooks in length. You wouldn't believe it, but the guy I saw using it had what looked like a PVC bong with a slit all the way down the side. He attached one swivel end to his line and slid each hook in succession up the slit to keep the line from tangling, then he attached a 5lb sinker at the other end. He put his rod in freespool with the clicker on, held the base of the bong pointing the other end toward the water and let the weight go. The hooks shot off like a machine gun. It worked well for squid and when anchovies were nose hooked.
I watched this guy fire this thing off, sit for 20 minutes, then reel up 40 or 50 whitefish with a few reds or other rockfish mixed in.
If you don't know where you're going, then any path will get you there.
- Jimr
- Forums Moderator
- Posts: 2182
- Joined: Fri Jul 31, 2009 2:14 pm
- Experience: Level 4 Explorer
- Location: Torrance
Re: Vancouver Island Canada - Monster Lingcod
Makes me want to go meat fishing again.
If you don't know where you're going, then any path will get you there.
- rlown
- Topix Docent
- Posts: 8224
- Joined: Thu Oct 25, 2007 5:00 pm
- Experience: Level 4 Explorer
- Location: Wilton, CA
Re: Vancouver Island Canada - Monster Lingcod
yeah.. at the 1200' mark the rules on hook mgmt is probably different, but I understand your rig. Closer in, the rules are getting tighter off the coast of Cali.
Used to tie my own sturgeon, striper and shark rigs. Shark rigs were wire with large hooks. All fun. Rules all changed.
Thanks for the update, Jimr, and not meant to detract from your really nice video Brandon. Still want to see how you cooked the beast.
Russ
Used to tie my own sturgeon, striper and shark rigs. Shark rigs were wire with large hooks. All fun. Rules all changed.
Thanks for the update, Jimr, and not meant to detract from your really nice video Brandon. Still want to see how you cooked the beast.
Russ
Who is online
Users browsing this forum: No registered users and 3 guests